Cheap rotating proxies cost roughly $2.99 to $12.35 a month for datacenter rotation, or about $1 to $7 per gigabyte for residential, depending on how the provider meters you. The sticker price matters far less than the rotation window, the per-IP traffic cap and whether the bandwidth you buy expires.
Key takeaways
- Webshare's rotating datacenter plans start at $12.35/month for 10 proxies refreshed every 15 minutes, with rotation configurable from 5 minutes to a month, and up to 200,000 IPs a month.
- Residential pricing spreads roughly seven-fold: about $1/GB at the budget floor, $2.85/GB at ProxyScrape, $3.50/GB at Webshare's entry rate and $7.00/GB at IPRoyal pay-as-you-go.
- IPRoyal's datacenter and ISP proxies carry an effective 100GB cap per rolling 30-day cycle, so a per-IP price is not a per-IP cost.
- Webshare keeps a permanent free tier of 10 proxies plus 1GB a month with no card; Decodo offers a 3-day trial and a 14-day money-back option.
- Unused traffic is not always lost. IPRoyal's residential bandwidth doesn't expire, while most bundles reset on a 30-day cycle.
What is a cheap rotating proxy?
A cheap rotating proxy is a paid relay that swaps the exit IP between requests or on a timer, sold at a low monthly or per-gigabyte rate. Cheap refers to the entry price, not the effective cost: rotation window, pool size and traffic limits decide what you actually get per dollar.
Mechanically, you get one gateway address from the provider. Your software points at that host and port, the provider picks an exit IP from its pool, and the pool rotates according to your settings. Webshare, for example, lets you set that rotation anywhere from every 5 minutes to every month on its datacenter plans.
The reason prices differ so much is the source of the address. Datacenter IPs sit on rented cloud hardware, so a provider can hand out hundreds of them per account and still charge a flat monthly fee. Residential IPs belong to real consumer connections and are sublet by the gigabyte, which pushes the cost up by an order of magnitude.
Note: Rotation isn't the same as a fresh IP every second. Most providers default to time-based rotation and let you pin a single address for the length of a task, which is the setting that matters for anything that needs continuity.
How much do cheap rotating proxies cost?
Datacenter rotation is the cheap end: Webshare's rotating plans run $12.35 a month for 10 proxies, $24.71 for 20 and $61.77 for 50, each refreshing across as many as 200,000 IPs a month. Residential is billed per gigabyte, and the spread is wide enough that the word "cheap" means little without a rate attached.
Per-month datacenter plans are the only genuinely predictable cheap option; per-GB residential is cheaper only while your volume stays small.
| Provider | Cheapest published entry | Billing model | Rotation control | The catch to check |
|---|---|---|---|---|
| Webshare | $2.99/mo proxy servers; $12.35/mo for 10 rotating datacenter proxies | Monthly per plan | 5 minutes to monthly, configurable | 48-hour refund only if usage stays under 1GB |
| ProxyScrape | $2.85/GB residential (5GB bundle at $14.25 excl. VAT); datacenter from $0.02/proxy | Per GB or per IP | Rotating pool with sticky sessions | Unlimited Residential is a $2,630 fixed 30-day rate |
| Decodo | Datacenter from $1.6/IP; ISP from $2.5/IP | Per IP, monthly | 125M+ pool across 195+ locations | Trial runs 3 days; money-back window is 14 days |
| IPRoyal | $7.00/GB pay-as-you-go, down to $1.75/GB at 10TB | Per GB, volume tiers | Sticky sessions up to 7 days on residential | 100GB per 30-day cycle cap per datacenter or ISP proxy |
| DataImpulse | About $1/GB | Per GB | Pool-based rotation | Budget floor; confirm pool size and country coverage first |
The gap becomes obvious with a real volume. Fifty gigabytes a month at ProxyScrape's published $2.85 rate is roughly $142, against $61.77 for Webshare's 50-proxy datacenter plan. If your work tolerates hosting IPs, per-month datacenter wins on cost by a wide margin.
Webshare's own homepage quotes Proxy Servers from $2.99/month, Static Residential from $6.00/month and Rotating Residential from $3.50/month, alongside 400K+ datacenter IPs, 80M+ residential IPs, 195 countries and 99.97% uptime. Rotating residential drops to $2.45/GB on annual billing and $1.40/GB at 3,000GB+ enterprise volume, so the same provider can look cheap or expensive depending on which tier you're reading.
Datacenter or residential: which cheap option fits your use?
Datacenter rotation is the right buy when you need volume, speed and a flat bill, and the address's provenance doesn't change your result. Residential is worth the per-GB premium when the target behaves differently for consumer connections or when you need city-level accuracy that hosting ranges can't give you.
| Datacenter rotation | Residential rotation | |
|---|---|---|
| Typical price | $2.99–$61.77/mo per plan | $1–$7 per GB |
| Billing risk | Buying the wrong plan size | Bill scales with every request |
| Address type | Hosting and cloud ranges | Consumer ISP assignments |
| Throughput | Generally higher, less metered | Higher latency, metered |
| Good fit | Geo checks, price monitoring at volume, QA of regional content | Geo-sensitive research, ad verification, brand checks in specific cities |
Many services treat hosting ranges differently from consumer addresses. That's the single biggest reason residential costs more, and it's also why buying residential for a job that doesn't need it is the most common way people overspend.
Decodo's dedicated datacenter proxies start at $1.6/IP and its dedicated ISP proxies at $2.5/IP, which sits between the two models: you get a stable address rather than a rotating one. If your work only needs a handful of stable exits, per-IP is usually the cheapest structure of all.
What is a proxy pool service, and how big a pool do you need?
A proxy pool service is the same product described by infrastructure instead of price: a managed set of IPs with rotation, authentication and geo-selection layered on top. Pool size matters, but far less than the number of distinct IPs you actually touch in a day and the concurrency your plan allows.
Marketed pool numbers are cumulative catalogues, not simultaneous capacity. ProxyScrape advertises 120M+ IPs across 190+ countries; Decodo advertises 125M+ across 195+ locations; Webshare advertises 80M+ residential IPs. None of those figures mean you can hold a fraction of them open at once.
Concurrency is the real constraint. Webshare's residential plans list thread limits across 500 to 3,000 threads, while ProxyScrape advertises unlimited concurrent connections. If your workload is many parallel requests rather than many IPs, the thread count is the number to compare, not the pool badge.
Geo granularity varies more than providers admit. Webshare caps state and ZIP targeting to the US while ASN targeting works globally, and Decodo and ProxyScrape both quote 190+ countries without city-level detail on the page. If you need city accuracy outside the US, ask before you buy.
Pro tip: Sticky session limits are where providers disagree most. IPRoyal's residential sessions can reportedly hold for up to 7 days, while Webshare's datacenter rotation tops out at a month between swaps. Test the actual sticky window during a trial rather than trusting the marketing page.
Where do the hidden costs hide?
The sticker rate is a starting point, not a total. Six things move the real cost, and most of them sit below the fold on the pricing page.
- Per-IP traffic caps. IPRoyal's datacenter and ISP proxies are capped at 100GB per rolling 30-day cycle, a limit the per-IP price doesn't show. Ten IPs at $1.60 each looks like $16 a month until you need 2TB of traffic.
- Thread limits. A plan that allows 500 threads will slow a parallel workload regardless of how large the pool is.
- Expiring bandwidth. Most per-GB bundles reset every 30 days. IPRoyal's residential traffic doesn't expire, which is worth real money if your usage is bursty rather than steady.
- Geo restrictions. US-only state and ZIP targeting changes the value of a "195 countries" claim if your work is city-level elsewhere.
- "Unlimited" clauses. IPRoyal's own FAQ says datacenter and ISP come with unlimited bandwidth under a fair usage policy, while a third-party price check describes the 100GB cap. Both can be true at once, and only the contract settles it.
- Refund thresholds. Webshare's 48-hour refund applies only under 1GB of usage (0.1GB for rotating residential) and fewer than 1,000 proxies used, so a failed test can still be a paid test.
Warning: Vendor prices drift and sources contradict each other. IPRoyal's per-IP datacenter entry has been quoted at $1.80, $1.53 and $1.39 at bulk across different write-ups. Always confirm the number at checkout rather than in a review.
Can you try a rotating proxy before you buy?
Yes, and for cheap plans the trial is usually enough to decide. Webshare runs a permanent free tier of 10 proxies plus 1GB of bandwidth a month with no credit card, which is a real working allowance rather than a tease. Decodo offers a 3-day free trial plus a 14-day money-back option.
A month of free-tier testing answers most of the questions a pricing page can't. Measure response time from your own location, check whether the rotation window you configured actually holds, confirm the sticky session survives as long as advertised, and verify that geo selection returns addresses in the country you asked for.
On paid plans, ProxyScrape advertises a 0.8s average response time and 99.9% success rate, and its Unlimited Residential plan quotes 200 Mbps bandwidth. Those are useful benchmarks to test against during a trial, not guarantees for your particular route.
Time-box the trial. Two days of your own real workload tells you more about whether a $2.85/GB pool suits you than a week of synthetic checks, and it keeps you inside most refund windows if the answer is no.
How do you buy rotating proxies without overpaying?
Start by costing the job rather than the proxy: estimate gigabytes per month and peak concurrency, then match those two numbers to a billing model. Most overspending comes from buying a plan shape that doesn't match the workload's shape.
- Estimate monthly gigabyte volume. Multiply your average page weight by request count. Under about 50GB a month, per-GB residential is rarely the cheapest route unless you genuinely need residential addresses.
- Count peak concurrency. If you need 200 simultaneous requests, a plan with 100 threads is the wrong purchase no matter how large the pool.
- Decide datacenter or residential deliberately. Pick datacenter unless the address type is the thing under test.
- Check geo granularity against your actual requirement. Country-level is cheap and common; city-level outside the US narrows the field sharply.
- Read the cap, not the badge. Look for per-IP traffic ceilings, thread limits and expiry rules before comparing headline prices.
- Start on the smallest tier. Webshare's 10-proxy plan at $12.35, ProxyScrape's 5GB bundle at $14.25 or a free tier will settle the question faster than a spreadsheet.
- Re-quote at your real volume. A $7/GB pay-as-you-go rate can fall to $1.75/GB at 10TB, so the rate that matters is the one attached to the tier you'll actually occupy.
Limitations
Cheap rotation stops making sense in four situations. If you need a stable, allowlisted address for a partner integration or a firewall rule, rotation is the wrong product and a static or dedicated IP is the right one.
If your volume is very large and steady, metered residential can cost more than a flat plan. ProxyScrape frames its $2,630 Unlimited Residential tier as replacing around $110,000 of metered traffic at $1.1/GB for 100TB a month; at that scale the flat rate wins, but at 200GB a month it would be absurd.
If you need contractual guarantees, cheap tiers generally don't carry them. Uptime badges like 99.97% are marketing claims, not service credits, and support response times on the lowest plan are the first thing providers trade away.
And if your use case carries legal or contractual obligations around the data you're touching, price is the wrong variable to optimise first. Talk to whoever owns compliance before you buy a plan, not after.
Frequently asked questions
Is a $1/GB rotating proxy as good as a $7/GB one?
Sometimes, and the price gap is not a reliable quality signal on its own. The $1 end of the market usually means a smaller pool, thinner geo coverage or less support headroom, while the $7 end often reflects pay-as-you-go pricing that falls to $1.75/GB at 10TB. Compare pool size, concurrency and geo accuracy instead of the rate.
Does unused bandwidth expire if I don't use it?
It depends on the provider and the plan. Most per-GB bundles reset on a 30-day cycle, so unused gigabytes are lost. IPRoyal's residential traffic reportedly never expires, which makes it a reasonable choice for intermittent workloads; check the terms for the specific plan rather than the brand.
How many IPs do I actually get with a rotating proxy?
You get access to the whole pool but only a limited number simultaneously. A plan advertising 120M+ addresses may still cap you at a few hundred concurrent threads, and the count of distinct IPs you touch in a day is usually far smaller than the catalogue. Concurrency and thread limits are the numbers that describe your real capacity.
Why does the same provider quote two different prices?
Because per-IP, per-GB and flat plans are different products priced against different costs. Webshare is a clean example: $2.99/month for proxy servers, $3.50/GB for rotating residential entry and $1.40/GB at 3,000GB+ enterprise volume. Always price the tier you'll actually sit in.
Start with the free tier, then size up
Grab Webshare's free 10 proxies and 1GB a month, or a 3-day Decodo trial, and run your real workload through it for two days. Record gigabytes used and peak concurrency, then buy the smallest plan that clears both numbers. That single measurement will save you more than any comparison table, including this one.
Manage multiple accounts from one browser
Sendwin is a native cloud browser that lets you log into multiple accounts on the same site simultaneously.