Which Antidetect Browsers Are Actually Worth Paying For?
Building an antidetect browser list that holds up comes down to three numbers per tool: the profile allowance, what the free tier really permits, and how much the proxy side adds to the bill. The nine below are ranked on current vendor pricing, platform support and whether fingerprint spoofing happens inside the engine. Send.win leads because residential proxies are included on every plan, starting with the free trial, instead of arriving as a second vendor.
📌 TL;DR Executive Summary
- Core Takeaway: Send.win takes the top slot: Pro is $19/mo, or $6.99/mo billed annually, and bundles 150 profiles with 20 residential proxies and 5 GB of bandwidth, so profiles and IPs sit on one invoice.
- Key Risk/Challenge: at scale, proxy bandwidth — not the browser licence — dominates the bill. Extra bandwidth on Send.win costs $6/GB; Multilogin lists extra proxy from $2.275/GB.
- Recommended Solution: match the tool to your operating system and automation needs, then verify every new profile with Pixelscan or Iphey before you sign a live account into it.
How This List Was Built
Four criteria set the order: what the vendor’s own pricing page says today, what each free tier permits once you read the limits, native apps for Windows, macOS and Linux, and whether spoofing happens inside the browser engine or through script injection that a routine update can break. Every antidetect browser list is a snapshot of one day’s pricing, so the criteria stay mechanical on purpose.
One caveat applies to every ranking in this category, including this one. Vendor blogs consistently place their own product first, so treat self-published comparisons as marketing. Independent re-testing published in July 2026 ran ten antidetect browsers through Pixelscan, Iphey and CreepJS on clean residential proxies and re-verified every price and free tier — that is the source to weigh against a vendor’s own table. If you want the mechanics behind those checks first, the breakdown of how websites detect antidetect browsers covers the signal layers.
Stale data is the second trap. The community-maintained list of undetectable tools still carries entries dated January 2024, and several aggregators quote prices from that era. Where sources disagree here, the entry says so: Multilogin’s entry tier shows up as both €9 and $11 depending on who published it, and Dolphin Anty is quoted at $10/mo, $10 for 20 profiles and $89 for 100 across three separate sources.
What These Browsers Are Actually Tested Against
Sites assemble a fingerprint from User-Agent, plugins, Canvas and WebGL signatures, audio, fonts, screen resolution, CPU core count, memory and language. WebGPU is joining that list as a graphics signal, and every value has to agree with the others.
| Signal | What it exposes | What a good browser does |
|---|---|---|
| User-Agent, platform, CPU cores, memory | Hardware contradictions, such as Linux parameters under a Windows user-agent | Spoofs them as one coherent machine per profile |
| Canvas, WebGL, WebGPU | GPU and driver signature | Renders stable per-profile values; ixBrowser is flagged in community lists for leaving GPU unmasked |
| Audio, fonts, screen size | Device-level entropy that survives a cleared cache | Per-profile values that fit the claimed OS |
| Timezone, locale, geolocation, WebRTC | Profile-versus-IP mismatch, DNS and WebRTC leaks | Follows the proxy exit IP automatically |
| TLS/JA3 handshake, HTTP/2 frame order | The browser build itself; a lagging engine looks unusual | Ships engine updates quickly, since even a trivial core update changes stealth |
Production antifraud goes further. It looks for Selenium and Puppeteer traces, navigator.webdriver and Chrome DevTools Protocol artefacts, then watches on-page behaviour. CreepJS compares hardware values between the page’s main thread and a background worker, flags macOS user-agents that are not frozen to 10_15_7, and can scan localhost for a local API server.
The target is not a unique or random fingerprint — it is a believable one that agrees with your proxy’s geolocation and the OS you claim. Pixelscan checks hundreds of parameters and requires all five key characteristics to agree before a profile counts as consistent, and a pass only proves the fingerprint holds together, not that a session survives a production anti-bot system. Platforms also keep a reputation score per user: a low score usually means extra verification or feature limits rather than an outright block, which is why a boring, consistent profile beats an exotic one. The anti detection browser isolation guide covers what actually keeps profiles from touching each other.
The Antidetect Browser List: 9 Tools Compared
1. Send.win — Residential Proxies Included on Every Plan
Sendwin runs a patched-Chromium desktop app on Windows 10/11, macOS 12+ and Linux, and the same kind of profile also runs in its cloud browser on EU and US nodes from any device. Canvas, WebGL, audio, fonts and hardware are spoofed inside the engine and kept coherent, so no two profiles share a fingerprint, and timezone, locale, WebRTC and geolocation follow the proxy exit IP automatically. That last detail removes the mismatch that trips most setups.
- Pros: residential proxies included on every plan — 10 during the free trial with 1 GB, 20 with 5 GB on Pro; no cap on how many local profiles run at once; cloud sync and profile sharing on paid plans; extra proxy bandwidth at $6/GB and extra profiles at $0.05 each.
- Cons: the local Automation API is Team-only; mobile device emulation is not part of the published feature set; the trial limits cloud browsing to 10 minutes a day and one cloud session.
2. Multilogin — Mature Stealth with Android Cloud Phones
Multilogin is the most established name in this category and now runs Android cloud phones alongside browser profiles. API access ships on every plan, including Free, at 50–100 requests per minute on Pro and 100 on Business — unusual at the cheap end.
- Pros: API from the free tier up; Android cloud phones; Pro 10 at $11/mo for 10 profiles; extra proxy from $2.275/GB.
- Cons: team access and management tools only appear at the 100-profile tier ($40/mo); free profiles are deleted after 7 days of complete inactivity; Free includes 1 mobile profile and 30 mobile minutes.
3. GoLogin — The Cheapest Serious Paid Entry
GoLogin came out as the best all-rounder for value in this year’s independent testing, at $9/mo or $4.50/mo billed annually, with a native Android app for mobile-only tasks.
- Pros: lowest paid entry in this list; native Android app; a free data plan with 3 profiles.
- Cons: the free plan excludes profile sharing and team members; 3 profiles is thin for real multi-account work; automation support on the cheapest tier is not confirmed.
4. AdsPower — Automation Built In, No Linux Build
AdsPower pairs a $9/mo tier ($7.20/mo annual) with automation inside the product, which suits teams that schedule routine actions across accounts instead of writing scripts.
- Pros: automation included rather than bolted on; low annual price; a free tier for testing.
- Cons: no Linux version; free-tier reports conflict between 2 and 5 profiles, and one vendor source says the free profiles are locked to a single geo.
5. Kameleo — The Most Generous Free Tier
Kameleo’s Free plan is the outlier here: unlimited fresh fingerprints, 100 cloud profiles, 2 custom-built browser kernels, 300 minutes of browser usage, 2 emulated mobile browsers and 3 team members, at €0. Paid tiers jump to €59/mo (€45 annual) and €299/mo.
- Pros: team seats on a free plan; custom kernels; emulated mobile browsers; 100 cloud profiles without paying.
- Cons: the 300-minute ceiling ends the free ride quickly; the paid jump is steep; billing is in EUR.
6. Dolphin Anty — Built for Media Buyers
Dolphin Anty targets media buying and affiliate work, with 5 free profiles and a paid entry around $10/mo. Confirm the number at checkout — published figures for the higher tiers vary by more than a factor of two.
- Pros: cheap entry; a free tier that covers a handful of ad accounts; a workflow tuned for ad platforms.
- Cons: sources quote $10/mo, $10 for 20 profiles and $89 for 100; some listings are over a year old.
7. Octo Browser — Clean Interface, No Free Tier
Octo Browser starts at €10/mo (roughly $11) and adds an iOS app for checking sessions from a phone. There is no free plan, so the first payment is your trial.
- Pros: iOS app; uncluttered profile management; pricing published in EUR.
- Cons: no free tier at all; nothing below the €10 mark; EUR billing adds conversion costs outside the eurozone.
8. Incogniton — Ten Free Profiles That Shrink
Incogniton opens with 10 free profiles and then drops to 3 depending on the source you read. Paid entry sits at $13.99/mo, with older listings showing $29.99 for 50 profiles.
- Pros: 10 profiles to test with; straightforward profile management; a documented paid path.
- Cons: the free tier shrinks to 3; pricing conflicts across sources; no stealth advantage over the cheaper tools above.
9. ixBrowser — Cheapest Licence, Weakest Fingerprint Coverage
ixBrowser undercuts everyone at $3.99/mo with unlimited stored profiles. The saving shows up in the limits and in what the fingerprint covers.
- Pros: lowest monthly price here; unlimited stored profiles; a free tier for occasional use.
- Cons: the free tier allows 10 new profiles and 100 launches per day; community testing flags GPU as unmasked, which stricter checkers such as CreepJS catch; no Linux build.
Side-by-Side Comparison Table
Every row uses the vendor’s own current page where one exists. The catch column holds the limit that starts to bite after the first month. Prices on any antidetect browser list go stale within weeks, so re-check the vendor page before you pay.
| Tool | Entry paid price | Free tier | Main catch |
|---|---|---|---|
| Send.win | $19/mo, or $6.99/mo annual | 30-day trial: 10 profiles, 10 proxies, 1 GB | Automation API is Team-only |
| Multilogin | $11/mo (Pro 10) | 5 cloud profiles, 1 mobile, 30 mobile minutes | Team tools start at 100 profiles; idle profiles deleted after 7 days |
| GoLogin | $9/mo ($4.50 annual) | 3 profiles | No sharing or team members on Free |
| AdsPower | $9/mo ($7.20 annual) | 2 profiles (one source says 5) | No Linux version; free profiles reported geo-locked |
| Kameleo | €59/mo (€45 annual) | 100 cloud profiles, 300 usage minutes | Usage ceiling ends the free plan fast |
| Dolphin Anty | About $10/mo | 5 profiles | Prices conflict across sources |
| Octo Browser | €10/mo (about $11) | None | EUR billing, no free tier |
| Incogniton | $13.99/mo | 10 profiles, later reduced | Free tier shrinks to 3 |
| ixBrowser | $3.99/mo | Unlimited stored, 10 new and 100 launches per day | GPU reportedly not masked |
Two tools did not make the shortlist for account management. Nstbrowser starts at $29.90/mo with 500 free profiles and targets scraping at scale rather than manual logins. GeeLark runs real cloud phones from about $5/mo plus usage, which is excellent for mobile-only work but not a browser replacement. If you are optimising purely on free capacity, the roundup of the best free antidetect browser options digs into trial limits.
What 100 Profiles Really Cost
The licence is rarely the expensive part. Run 100 profiles that each move 50 MB of residential traffic a day and you push about 150 GB a month. At Send.win’s $6/GB rate for extra bandwidth that lands near $900 in traffic, against $19 for the browser tier itself — and 100 profiles still fit inside the Pro allowance of 150. At Multilogin’s $2.275/GB starting rate the same traffic comes to roughly $341.
That one calculation should change how you shop, and it is the part most antidetect browser list comparisons get wrong. Three levers keep it sane:
- Fewer, busier profiles. One profile per account, not one per task. Splitting a single buyer across three profiles triples the traffic for no stealth gain.
- Bring your own proxy where you already pay for one. Every tool here accepts HTTP or SOCKS5, and Send.win supports bring-your-own on all plans including the trial.
- Cut media weight. Images, video previews and trackers dominate per-page bandwidth. Blocking image-heavy domains on profiles that only need to log in and post strips most of the bill.
Setting Up Your First Isolated Profile
The first profile decides whether the rest of your setup works. Work through this in order:
- Install the desktop app and create a profile. Sendwin assigns a fingerprint set automatically; you do not need to hand-tune canvas noise.
- Attach a residential proxy in the country the account has always logged in from. Residential and mobile IPs blend in better than datacenter ranges or VPNs because they come from real user devices.
- Confirm timezone, language and geolocation match the exit IP. Send.win does this automatically; with other tools, set it manually and re-check.
- Run Pixelscan or Iphey first. Both test fingerprint consistency plus WebRTC and DNS leaks, and they are more forgiving than CreepJS while you fix obvious mismatches.
- Run CreepJS last. It is the strict test, and a clean session reports 0% headless and 0% stealth; it will call out worker-thread hardware mismatches and automation traces.
- Only then sign in, and keep that account in that profile permanently.
Automation attaches to the profile you already verified rather than starting a fresh browser. With Sendwin, copy the CDP endpoint from the profile’s automation settings and connect:
from playwright.sync_api import sync_playwright
# Placeholder — copy the real value from the profile's automation settings.
CDP_URL = "http://127.0.0.1:PORT"
with sync_playwright() as p:
browser = p.chromium.connect_over_cdp(CDP_URL)
context = browser.contexts[0]
page = context.new_page()
page.goto("https://example.com/login")
page.fill("#email", "[email protected]")
print(page.title())
browser.close() # disconnects the script; the profile stays open
Puppeteer reaches the same endpoint through its browser URL option, and Selenium attaches with Chrome’s debugger address pointed at the same host and port. The point is that the script drives the verified profile; it does not spawn a default browser, which is where most automation leaks come from. Working habits matter as much as the tooling — one account per profile, no shared recovery emails, and never the same account from two profiles in a day. The antidetect browser privacy guide covers the rest of the hygiene rules.
How to Pick Based on Profile Count and Team Size
Profile count narrows an antidetect browser list faster than any feature comparison, because it decides which tiers you are even eligible for. Work down the bands:
Under 10 profiles: use a free tier to validate the workflow. Kameleo offers 100 cloud profiles at €0, Incogniton starts at 10, GoLogin at 3. Send.win’s 30-day trial covers 10 profiles with 10 built-in residential proxies, which tests your proxy quality at the same time as the fingerprints.
10 to 50 profiles: the paid entry tiers all sit in the $9–$20 band, so price stops being the deciding factor. Choose on platform support (Linux rules out AdsPower), on whether proxies are bundled, and on whether you need mobile profiles.
50 to 200 profiles: check tier boundaries carefully. Send.win Pro covers 150 profiles with 20 residential proxies and 5 GB of bandwidth at $19/mo, and extra profiles cost $0.05 each. Multilogin reaches 100 profiles at $40/mo but only unlocks team management at that point.
200 profiles or a team: budget for bandwidth separately, buy the plan that includes sharing and seats rather than bolting them on, and confirm automation sits on the tier you are paying for. Send.win’s Team plan carries 500 profiles, 20 GB of bandwidth, 16 seats and the local Automation API at $49/mo, or $20.99/mo billed annually.
🏆 Send.win Verdict
Send.win takes the top slot on this antidetect browser list for one structural reason: residential proxies are included on every plan, from the 30-day trial upward. That removes the second vendor, the second invoice and the mismatch risk you get from pairing a browser with a proxy it was never tuned against. Windows, macOS and Linux apps plus a cloud browser cover more platforms than most tools here, and the stealth engine keeps canvas, WebGL, audio and hardware coherent per profile instead of patching values with scripts. The honest limits are the Team-only Automation API and the absence of mobile device emulation.
Try Send.win free today — 30 days at $0 with 10 profiles and 10 built-in residential proxies, cancel anytime, and a 7-day money-back guarantee once your plan continues on Pro.
Frequently Asked Questions
Do any antidetect browsers have a real free plan?
Yes, several. Kameleo gives 100 cloud profiles with 300 usage minutes at €0, GoLogin gives 3 profiles, Dolphin Anty gives 5, Incogniton starts at 10 and ixBrowser allows unlimited stored profiles with daily launch caps. Multilogin’s free tier includes 5 cloud profiles but deletes them after 7 days of complete inactivity.
How much do antidetect browsers cost per month?
Entry tiers cluster between $4 and $20: ixBrowser at $3.99, GoLogin at $9, AdsPower at $9, Dolphin Anty around $10, Multilogin at $11, Incogniton at $13.99 and Send.win at $19, or $6.99 billed annually. Annual billing usually cuts the monthly figure — Send.win’s annual rate is 63% below its monthly rate.
Can sites still detect an antidetect browser?
They can detect bad configuration rather than a brand of browser. A pass on Pixelscan or Iphey only proves the fingerprint holds together; TLS/JA3 handshakes, HTTP/2 frame ordering and behavioural analysis sit on a different layer. Lags in engine updates are the common failure, since even a trivial core update changes what a session looks like.
What is the difference between an antidetect browser and a VPN?
A VPN changes your IP address but leaves the same fingerprint across every account you open. An antidetect browser isolates cookies, cache and fingerprint per profile, so each one reads as a separate machine. For multi-account work you need both a distinct fingerprint and a residential IP, not just one of them.
Do antidetect browsers work with Selenium and Puppeteer?
Most do, through the Chrome DevTools Protocol. You start the profile, copy its CDP endpoint, and connect with connect_over_cdp in Playwright, the browser URL option in Puppeteer, or the debugger address setting in Selenium. Send.win exposes this local Automation API on the Team plan, so check each vendor’s tier before assuming it is free.
Is a residential proxy required for antidetect browsers?
Not required, but strongly recommended. Residential and mobile IPs come from real user devices and blend in better than datacenter ranges, which are easy to flag. The proxy also has to agree with the profile: if the timezone says Berlin and the exit IP sits in Dallas, that mismatch is the tell.
How do fingerprint checkers like Pixelscan and CreepJS work?
Both read the values a site would read and test them for internal agreement. Pixelscan checks hundreds of parameters and requires five key characteristics to agree before calling a profile consistent. CreepJS is stricter: it compares main-thread and worker-thread hardware, flags macOS user-agents not frozen to 10_15_7, and can probe localhost for an automation server.
Which antidetect browser is cheapest for many profiles?
ixBrowser has the lowest licence at $3.99/mo, but its free tier caps you at 10 new profiles and 100 launches per day and its GPU masking is reported as incomplete. Once bandwidth enters the maths, the tool with included proxies usually wins: Send.win charges $0.05 per extra profile and $6/GB, and Pro bundles 150 profiles with 5 GB at $19/mo.
How Send.win Helps With Antidetect Browser List
Send.win is an antidetect browser built for exactly this kind of work — every profile is a clean, isolated identity:
- Isolated profiles – unique fingerprint, separate cookies and storage per profile
- Stealth engine – canvas, WebGL, fonts, and audio spoofed at the engine level
- Desktop app + cloud sessions – native app for Windows, macOS, and Linux, or run profiles in the cloud with no install
- Built-in residential proxies – with automatic timezone, locale, and WebRTC matching
- Team features – share logged-in profiles with teammates without sharing passwords
Try the instant cloud browser demo — no install, no signup — or download the desktop app. The 30-day free trial needs no credit card, and paid plans start at $6.99/month billed annually (see pricing).